Medtronic 500 T Betriebsanleitung PDF herunterladen (Seite 60)

Medtronic Physio-Control Corp.

Alarwary

2000.

lnttructionsOp~mthg dsflbrlllrtor

Sxt~nh~I

automated

560 UPEPAK

5-7

AED

and then turn it on again.

AED

detects a problem

during the test, the service indicator and

CALL SERVICE

message appear. Contact authorized service

personnel to perform service. To repeat the test, turn off the

AED

records the results in the Test Log. If the

AED

for the next patient use.

After the test is complete, the

AED.

10 Prepare the

AED

displays the TEST OK message.

8 Disconnect the test load.

Press ON/OFF to turn off the

AED

is fully charged, you will see and hear:

STAND CLEAR and PUSH TO SHOCK messages

STAND CLEAR

and

PUSH TO SHOCK

voice prompts

Press SHOCK to discharge the energy into the test load.

7 Confirm that the

ADViSED

voice prompt

A rising charging tone that simulates a typical charge time

When the

CLfYAR

voice prompts

After a few seconds you will see and hear:

SHOCK ADVISED

message

SHOCK

AED

will start analyzing automatically.

You will see and hear:

ANALYZING NOW and STAND CLEAR messages

ANALYZING NOW, STAND

AED

that does not have an ANALYZE

button, the

2 is selected or you have an

8-l

Test load connection

Press ON/OFF and observe that the TEST MODE message appears. (The TEST MODE message is

displayed throughout the test.) If the TEST MODE message does not display, reconnect the test load

and ty again. If AUTO ANALYZE is off or AUTO ANALYZE

is selected, you will see and hear:

PUSH ANALYZE message

PUSH ANALYZE

voice prompt

Press ANALYZE. If AUTO ANALYZE

Cable Connector’

Figure

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Medtronic 500 T Betriebsanleitung Seite 60

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fitness, Gymnastik & Krafttraining Medtronic 500 T