Medtronic Paradigm Link Betriebsanweisung PDF herunterladen (Seite 118)

ಘ

The SQUARE DURATION screen appears. Enter the amount of time you want the Square Wave bolus to

last, then press ACT.

If you have BG Reminder turned On, the BG REMINDER DURATION screen displays. It allows you to set

the duration before you are reminded to check your blood glucose after a bolus.

ಘ

Press ACT to accept and deliver the bolus. The BOLUS DELIVERY screen appears with an open circle

indicating that your pump is in Special Mode. The pump beeps or vibrates at the start of the bolus. During

bolus delivery, the pump returns to the HOME screen. If you want to see the progress of the delivery, press

ESC to see the STATUS screen. The pump beeps or vibrates at the end of the bolus, and the open circle

disappears.

Easy bolus

The EASY BOLUS button allows a quick way to deliver a Normal bolus. You will pre-set the settings for

this feature in the EASY BOLUS OPTION screen in the BOLUS MENU. Your pump is sent from the factory with

the Easy Bolus feature set to on. If you do not want to use Easy Bolus, turn it off.

After you set up Easy Bolus, with each

press, you can increase the Normal bolus amount by a fixed amount,

called a step. Before you can deliver an Easy Bolus, you must set the amount in the EASY BOLUS ENTRY screen.

This amount equals the number of units of insulin for each step. The maximum number of steps can equal

up to your maximum bolus limit. When using vibrate mode, EASY BOLUS is limited to 20 steps or maximum

bolus, whichever comes first.

After you set your step amount, you can program your Easy Bolus. When you are in the HOME screen, each

time you press

the Easy Bolus amount increases by one step. You will hear a beep or feel a vibration for

each step increase. Each beep is a different tone. This makes it easy for you to count the beeps while you

are programming your Easy Bolus.

Easy bolus setup

ಘ

Go to the EASY BOLUS OPTION screen.

Main > Bolus > Easy Bolus

Select On/Set, then press ACT. If you do not want to use Easy Bolus, select Off and press ACT.

NOTE: If you are using the remote control, the Easy Bolus must be set to on.

ಘ

Optimizing pump therapy

ಘChapter 7

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 261 262

Keine Kommentare

Medtronic Paradigm Link Betriebsanweisung Seite 118