Medtronic 500 T Betriebsanleitung PDF herunterladen (Seite 47)

4-S

Medtronk Physio-Control Corp.

2UOO.

alarwary

I-8

Opuatlng

de6brlllatw

earnal

URPAK

566 l m

AED

and prepare it for the next patient use.

Turn

off the

AED

successfully completes the data transfer, it displays the SEND COMPLETE message.

6 Check that the LOW BATTERY indicator is not displayed.

7 Disconnect the Printer Cable.

AED

displays the following message to indicate progress:

SENDING

After the

to print the Current and Previous Patients.

While the data is being transferred, the

and

to print the Previous Patient.

Press both

to print the Current Patient.

Press

AED

to a printer

After a few seconds, you will see the message:

TO PRINT PUSH

Connecting the

AED

Printer

Figure

~~~1

LIFEPAK 500

AED

and the printer.

xx.xx

message

Connect the equipment as shown in Figure 4-6.

Connect the Printer Cable to the

AED

displays:

BATTERY status message

SELF-TEST

button

until the

AED.

not release the

button, press ON/OFF to turn on the

AED

is turned off for at least 60 seconds.

Make sure that the printer is turned on.

While holding down the

AED

data:

Make sure that the

25-pin

D style connector

Procedure for Printing

Perform these steps to print

g-pin

printheadsESC/P protocol for

EPSON

AED)

Printer (EPSON LX-300-compatible):

AED

data.

Table 4-4

Reauired Resources for Printing Data

Printer Cable (for use with the LIFEPAK 500

Required Resources

Table 4-4 summarizes the resources required to print

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Medtronic 500 T Betriebsanleitung Seite 47

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fitness, Gymnastik & Krafttraining Medtronic 500 T