Medtronic Revel Betriebsanweisung PDF herunterladen (Seite 39)

Time display

The current time of day is displayed across the top of the pump screen in the

format you select—12-hour or 24-hour. The AM or PM is only displayed for the 12-

hour format. For instructions on setting the time on your pump, see the Setting

the time and date section in the Basic programming chapter.

Reservoir volume

The reservoir volume icon tells you how much insulin is in your pump. This icon is

also divided into four segments. Each segment represents approximately 25 percent

of the reservoir volume you have left. This allows you to be aware of how much

insulin you have left in your pump. Refer to your STATUS screen to view the number

of units left in the reservoir.

NOTE: For the Paradigm 723/723K pump, your reservoir icon will only appear full

if using a filled 300–unit Paradigm reservoir. The icon will not appear full if you use

the 176–unit Paradigm reservoir.

Alert and alarm icons

An open circle (alert) or a solid circle (alarm) are displayed in the upper part of

your pump screen only when there is an alert or alarm condition on your pump.

For alarm and alert information, see the Troubleshooting, alerts and alarms

chapter.

Sensor icons

A dark sensor icon means that the sensor is on and the pump is receiving

sensor data. A light-colored sensor icon with a dark circle around it

means that the sensor is on, but the pump is not receiving sensor data.

For information about the sensor, see the Sensor features chapter.

Time Display

24-Hr

12-Hr

Less than 25% left

75 to 100% left

Alarm icon

Alert icon

Sensor is on and the pump

is receiving sensor data

Sensor is on but the pump

is not receiving sensor data

The basics18

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 264 265

Keine Kommentare

Medtronic Revel Betriebsanweisung Seite 39